Support
Need help? Check the answers below or write to crumby-chevron.5w@icloud.com. Please include your receiver model, its image (e.g. OpenATV 7.2) and your Apple TV, iPhone or iPad model.
Most answers below are about Enigma2MR for Apple TV. For Enigma 2 i on iPhone and iPad, see iPhone and iPad – connection, streaming and receiver topics apply to both apps.
The app does not find my receiver
- Make sure the receiver is switched on (not in deep standby) and connected to the same network as the Apple TV.
- Check that OpenWebif works: open
http://<receiver address>in a browser on a computer in the same network. - Allow local network access: Apple TV Settings → Privacy & Security → Local Network → Enigma2MR.
- If your network uses a guest Wi-Fi or "client isolation", Apple TV cannot see other devices – use the main network.
- You can enter the address manually: Apple TV Settings → Apps → Enigma2MR → STB Address.
"Receiver not reachable"
Enigma2MR knows your receiver but it does not answer. The app keeps trying in the background and continues automatically when the receiver is back. If it stays unreachable, restart the receiver; check its network cable or Wi-Fi.
Settings → Connection → Reconnect checks the receiver again and restarts playback; if it still does not answer, the message names the address and port to check.
Channels list works but live TV does not start
- If Require authentication for http streams is enabled on the receiver, enter its user name and password in Enigma2MR → Settings → Connection.
- The receiver needs a free tuner for every stream. A recording or another Apple TV may be using the tuners.
- Encrypted channels play only if the receiver can decrypt them and Unscramble http streams is enabled (Enigma2MR → Settings → Streaming).
Picture stutters
Connect the receiver to your router with an Ethernet cable. Wi-Fi on receivers is often slow for a continuous TV stream.
The remote
- Click up or down: channel list of the current bouquet over the picture; click left or right there to switch bouquets.
- Click left or right: previous or next channel. In a recording or in paused live TV: jump one minute (30 seconds in the timeshift buffer); hold for five minutes (two minutes).
- Click: pause and play. Hold the click: record menu for the channel on screen.
- Swipe up: info overlay with the timeline and buttons for audio & subtitles, the channel list and recording – click down from the timeline to reach them. Swipe down: audio tracks and subtitles. Menu: TV guide.
- The guide to the remote appears once, the first time something plays. All of this is also under Help in the TV guide.
Timeshift
Pause with the Play/Pause button or a click; the timeline appears. Click left or right to jump 30 seconds, hold for two minutes, or swipe clearly sideways on the touch surface to scrub – to the right end to return to live. The buffer length (30 minutes to 3 hours) is set in Enigma2MR → Settings.
Camera pans judder, interlaced picture
Enable Match frame rate (50 Hz) in Enigma2MR → Settings → Picture and sound and “Match Frame Rate” in the Apple TV’s Video and Audio settings; Apple TV then switches to 50 Hz for European broadcasts. The deinterlacer can be chosen in the same section (Automatic, Off, Blend, Yadif).
Sound out of sync on AirPlay or HomePod
Enigma2MR compensates the delay of wireless speakers automatically. If the sound still runs ahead of or behind the picture, adjust Audio sync in Settings → Picture and sound (−2 to +2 seconds).
Audio track and subtitles
Swipe down (or use the Audio & subtitles button on the info overlay) to pick a track. The choice is remembered for that channel. Set a preferred audio language in Settings → Picture and sound for channels you watch for the first time.
Reminders and AutoTimer rules
- Reminders: select a programme in the guide and choose Remind me. While Enigma2MR runs, an alert appears two minutes before the start with the option to switch over. tvOS does not deliver notifications when the app is closed.
- AutoTimer: Record every episode creates a rule on the receiver, which needs the AutoTimer plugin (part of most images). Rules are listed under Recordings with a ⟳ badge; swipe down on one to remove it. If the receiver answers with an error, install or enable the AutoTimer plugin on it.
Recordings are grouped
Episodes with the same series title and recordings in a sub-folder appear as one tile with the number of recordings. Select it to see the episodes and open one. Delete episodes individually.
Mini TV in the guide
While the menu is open, the running channel keeps playing in the lower right corner. Turn it off in Settings → Watching on Apple TV → Mini TV in the guide.
Several receivers
- Add another receiver in Enigma2MR → Settings → Receivers → Add receiver…: Enigma2MR searches your network and lists the receivers it finds. A receiver that is not found can be added by entering its address in Apple TV Settings → Apps → Enigma2MR → STB Address.
- Select a receiver in the list and choose Watch from this receiver. Each receiver remembers its own last channel. You can also remove a receiver there.
- You can also switch from the Rooms tab: select a receiver and choose Watch from this receiver.
- If a receiver needs a password, switch to it and enter its user name and password under Settings → Connection. They are stored for that receiver and sent only to it.
Rooms and continuing in another room
The Rooms tab lists the other Apple TVs in your home that use Enigma2MR and what they are playing, and the status of each receiver: on or standby, the current channel, a running recording and the number of active streams.
- All Apple TVs must be signed in to the same iCloud account (Apple TV Settings → Users and Accounts). The receivers must be on the same local network as the Apple TV.
- When another Apple TV was just playing something, Enigma2MR offers to continue it here: the same receiver and channel, or the recording at the same position. You can also select a room in the Rooms tab and choose Watch here.
- Each Apple TV is shown with its device name. To change it, select this Apple TV at the top of the Rooms tab and enter a room name, e.g. "Living room".
- An Apple TV disappears from the list two days after it last played something.
- A room does not appear? Check that iCloud is turned on for both Apple TVs and that Enigma2MR has been opened on both since the update.
Rooms only shares what is playing between your own Apple TVs, through your private iCloud. It does not let you watch outside your home: the picture always comes from the receiver on your local network.
Searching the TV guide
Open the Search tab and type a programme title. Enigma2MR searches the TV guide of all channels on the active receiver. Select a result to see its details, repeats and similar programmes, or to schedule a recording. The search covers the days for which the receiver has guide data – usually several days ahead.
Recording from the player
- While watching a channel, press and hold the centre of the touch surface (Select) for about a second.
- Choose to record the current programme, or the next 30 minutes, 1 hour or 2 hours. The recording is made by your receiver and appears in Recordings.
- A red REC badge shows while the channel is being recorded. Press and hold again to stop the running recording.
- "Recording not changed" means the receiver refused the timer – usually because no tuner is free or the timer overlaps another one. The message shows the receiver's reason.
Now Playing, Control Center and Siri
While Enigma2MR plays, the programme title, the channel and artwork appear in Control Center, in the Apple TV Remote on iPhone and for Siri. Pause, play and skip back or forward (in the timeshift buffer or a recording) work from there too. Skipping is not available for a channel without a timeshift buffer.
Channel logos
Enigma2MR uses the picons installed on your receiver – matched by service reference or by channel name. Channels without a picon get a logo from the community tv-logo/tv-logos project, or their name. To change a logo, install or update picons on the receiver.
Languages
Enigma2MR is available in English, Polish and German and follows the language of your Apple TV (Settings → General → Language). Programme titles and descriptions come from the receiver's TV guide and stay in the language of the broadcast.
Recordings are missing
Enigma2MR lists recordings from all recording locations the receiver reports and their parent folder. Recordings on network shares that the receiver has not mounted are not visible.
iPhone and iPad (Enigma 2 i)
- The receiver is not found: allow local network access in iOS Settings → Privacy & Security → Local Network → Enigma 2 i, and use the same Wi-Fi as the receiver (not a guest network). You can also add a receiver by address in Enigma 2 i → Settings → Receivers.
- Switching channels: swipe up or down on the picture. Tap pauses (live TV is buffered on the device), double-tap switches between the whole picture and a screen-filling view, a long press opens the record menu. Turn the phone for full screen.
- The TV in the room changes channel: turn off Switch receiver to watched channel in Settings → Streaming. It is off by default; the phone then gets its own stream and only “On TV” switches the receiver.
- Picture stutters on Wi-Fi: stay close to the router or turn on Use transcoding port in Settings → Streaming if your receiver supports transcoding (port 8002) – it sends a smaller stream.
- Reminders do not appear: allow notifications for Enigma 2 i in iOS Settings → Notifications.
- Sound stops when I lock the phone: turn on Keep playing sound in the background in Settings → Picture and sound.
- Foldable iPhone: closed, the cover screen fills with the middle of the picture; open, the full frame is shown. A double-tap overrides this until you fold or unfold the phone again.
- My Apple TV does not appear in Rooms: sign in to the same iCloud account on both, and open Enigma2MR on the Apple TV once since installing Enigma 2 i. The Apple TV appears while it plays something.
